Communication-concepts 2M 1KW Amateur Application Note Manual do Utilizador descarregar pdf (Página 6)

RF Reference Design Data

Freescale Semiconductor

MRFE6VP61K25H MRFE6VP61K25HS 2 Meter Amateur

IMD MEASUREMENT

IMD measurement was done using two signal generator

with a tone spacing of 1 kHz. Quiescent current was set for

2.5 A under 50 volts with no RF signal at input. 2.5 A was

choosen as a good compromise between gain, linearity and

efficiency.

In order to get optimal linearity, a thermal compensation

circuit was used that tracks the quiescent current of the

board over the temperature range (not shown on picture).

Refer to AN1643 RF LDMOS Power Modules for GSM Base

Station Application: Optimum Biasing Circuit

(1)

or the VHF

Broadcast Reference Design for more information.

(2)

The two--tone IMD values are referenced to the peak

envelope power (PEP) and are spaced 1 kHz apart.

Table 5. Two--Tone IMD

out

(W) PEP IM3--L IM3--U IM5--L IM5--U IM7--L IM7--U IM9--L IM9--U

100.0 --42.2 --42.2 --61.3 --64.1 --72.5 --74.4 --85.1 --85.1

199.5 --42.0 --42.3 --57.8 --59.6 --69.9 --70.6 --75.2 --78.0

399.8 --44.8 --44.0 --50.8 --51.7 --66.6 --68.2 --73.3 --72.1

599.3 --41.7 --41.5 --45.1 --45.5 --68.1 --71.7 --68.1 --68.9

797.1 --33.7 --33.7 --42.4 --42.2 --56.5 --57.3 --68.5 --65.9

899.8 --30.8 --30.9 --42.0 --41.8 --51.9 --52.4 --68.0 --69.5

997.8 --28.7 --28.6 --42.7 --42.3 --48.6 --48.7 --73.7 --73.4

ate: 3.NOV.2010 14:4

Figure 6. 1000 W PEP Two--Tone Spectrum

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Sem comentários

Communication-concepts 2M 1KW Amateur Application Note Manual do Utilizador Página 6